YASUDA SEIKI - Heat Distortion Tester Series
Harga : Rp 0.00 Rp 123.00
Brand : Yasuda Seiki,Qualitest,Cometech,Drick
Stok : In Stock
YASUDA SEIKI - Heat Distortion Tester Series
YASUDA SEIKI - Heat Distortion Tester Series
HDT Test [DTUL / VICAT] Heat Distortion (Deflection Under Load), Heat Distortion Tester
- No.148 Heat Distortion Tester
- Standard Method : JIS K7191-1 ; K7206 ; ASTM D648 ; D1525 ; ISO 75-1、306
- This tester is used to evaluate the heat resistance of plastic.
- By loading specified bending stress to the test specimen while increasing the test temperature of the oil bath at a certain rate, the operator is to report the temperature at which the test specimen reaches standard deflection.
- The tester can also conduct the VICAT softening temperature test.
| No.148HD HEAT DISTORTION TESTER | |
| SPECIFICATION | |
| Stations | 3, 4 or 6 Stations (3 kinds) |
| Temperature Range |
Max. 300 °C (Oil Bath) |
| Heating Speed |
120 ± 10°C/hr, 50 ± 5°C/hr, VICAT : 120 ± 10℃/hr, 50 ± 5°C/hr |
Bending Stress |
(Method A) JIS･ISO : 1.80MPa ; (Method B) 0.45MPa ; (Method C) 8.00Mpa ; ASTM : 1.82Mpa ; 0.455Mpa |
Weight Load |
DTUL: Choose 2 weights from initial load 76.5gf to max. 3,210gf Options VICAT: 10 ± 0.2N, 50 ± 1N BP: 19.6 ± 20N |
| Displacement Measurement |
Differential Transformer : Scale 1/1,000mm, Stroke 4mm |
Pressure Foot |
DTUL: R 3.0 ± 0.2 mm |
| Option VICAT: 1.000 ± 0.015 mm2 | |
| Option Ball Pressure: φ5 mm | |
| Support Length | 64 ± 1 mm, 100 ± 2 mm |
| Refrigerating Device |
Water Circulating System Option Built-In Refrigerator *For low test start temperature (e.g., 20 to 23°C) |
| Oil Circulation Device |
Propeller Type For 3 and 4 Stations : 2 Propellers For 6 Stations : 3 Propellers |
| Software | Windows 10 Compatible (Included) |
| Accessories | Pressure Foot Adjustment,Specimen Holder |
| Option | Silicon Oil, Safety Cover,Simultaneous Loading Device, Built-In Printer,Oil Level Sensor, Glass Sample for Calibration (Fused Quartz), Safety Door Lock,Signal Tower Light |
| Power Source | Without refrigerator For 3 and 4 Stations : Single-Phase, AC200/220V 20A 50/60Hz For 6 Stations : Single-Phase, AC200/220V 30A 50/60Hz With refrigerator For 3 and 4 Stations : Three-Phase, AC200/220V 20A 50/60Hz For 6 Stations : Three-Phase, AC200/220V 30A 50/60Hz |
| Dimensions / Weight (Approx.) |
Floor Model W1,100 × D700 × H1,500mm ; 180 to 300 kg Tabletop Model W1,100 × D700 × H1,000mm ; 155 to 185 kg |
=============================
- No.148-HDA Heat Distortion Tester (Full Automatic)
- Standard Method : JIS K7191-1 ; K7206 ; ASTM D648 ; D1525 ; ISO 75-1、306
- This tester is the fully automatic version of the HEAT DISTORTION TESTER.
- The robotic mechanism enables the operator to conduct the usual heat distortion test and VICAT softening temperature test automatically.
- By setting the test specimen to the specimen feeder, the computer software will continuously conduct heat resistance test for a maximum of 120 samples.
| No.148-HDA Heat Distortion Tester (Full Automatic) | |
| SPECIFICATION | |
| Stations | 3 or 6 Stations |
| Temperature Range |
Max. 300°C (Oil Bath) |
| Heating Speed | 120 ± 10°C/hr and 50 ± 5 °C/hr, VICAT : 120 ± 10℃/hr, 50 ± 5°C/hr |
| Bending Stress | (Method A) JIS･ISO: 1.80MPa ; (Method B) 0.45MPa, (Method C) 8.00Mpa ASTM: 1.82Mpa, 0.455Mpa |
| Weight Load | DTUL : Choose 2 weights from initial load 76.5gf to max. 3,210gf *Simultaneous Loading Device included Options VICAT: 10 ± 0.2N, 50 ± 1N ; BP: 19.6 ± 20N |
| Displacement Measurement |
Differential Transformer : Scale 1/1,000 mm, Stroke 4 mm |
Pressure Foot |
DTUL : R3.0 ± 0.2mm Options VICAT : 1.000 ± 0.015mm² BP : Ball Diameter 5mm |
| Support Length |
64 ± 1mm, 100 ± 1mm Option 101.6 ± 0.5mm |
| Refrigerating Device |
Water Circulating System, Built-In Refrigerator *For low test start temperature (e.g., 20 to 23°C) |
| Oil Circulation Device |
Propeller Type For 3 and 4 Stations: 2 Propellers For 6 Stations: 3 Propellers |
| Test Specimens |
40 pcs × 3 sets (Total 120 pcs) *For T10mm |
| Software | Windows 10 compatible (Included) |
| Accessories | Pressure Foot Adjustment, Specimen Holder |
Option |
Silicon Oil, Glass sample for calibration (fused quartz), Built-in printer, Oil level sensor, Safety door lock, Signal tower light |
Power Source |
Without refrigerator For 3 and 4 Stations : Single-Phase, AC200/220V 20A 50/60Hz For 6 Stations : Single-Phase, AC200/220V 30A 50/60Hz With refrigerator For 3 and 4 Stations : Three-Phase, AC200/220V 20A 50/60Hz For 6 Stations : Three-Phase, AC200/220V 30A 50/60Hz |
| Air Source | 0.5MPa or more |
| Dimensions / Weight (Approx.) |
W1,460 × D900 × H1,715mm / 450 to 550kg |
=============================
- No.148-HD500 High Temperature Heat Distortion Tester
- Standard Method : JIS K7191-1 ; K7206 ; ASTM D648 ; D1525 ; ISO 75-1、306
- This tester adapts the air circulating heating system to test the heat resistance of plastic (usually super engineering plastic) up to 500 °C.
- The specimen racks are made by glass quartz to prevent measuring disturbances due to the deflections of the racks itself.
| No.148-HD500 High Temperature Heat Distortion Tester | |
| SPECIFICATION | |
| Stations | 3 Stations |
| Temperature Range |
Max. 500°C (Air Chamber,Nitrogen Gas Filling Device Attached) |
| Heating Speed |
120 ± 10°C/hr, 50 ± 5°C/hr, VICAT : 120 ± 10 ℃/hr, 50 ± 5°C/hr |
Bending Stress |
(Method A) JIS･ISO: 1.80MPa ; (Method B) 0.45MPa, (Method C) 8.00Mpa ASTM: 1.82Mpa, 0.455Mpa |
Weight Load |
DTUL: Choose 2 weights from initial load 76.5gf to max. 3,210gf *Simultaneous Loading Device included Options VICAT: 10 ± 0.2N, 50 ± 1N BP: 19.6 ± 20N |
| Displacement Measurement |
Differential Transformer : Scale 1/1,000mm, Stroke 4mm |
Pressure Foot |
DTUL: R3.0 ± 0.2mm Options VICAT: 1.000 ± 0.015mm² BP: Ball Diameter 5mm |
| Support Length | 64 ± 1mm, 100 ± 1mm |
| Refrigerating Device | Fan type (Air Fan Cooling), 3 Fans |
| Oil Circulation Device | Propeller type, 2 propellers |
| Software | Windows 10 Compatible (Included) |
| Accessories | Pressure Foot Adjustment, Specimen Holder |
Options |
Simultaneous Loading Device, Built-in Printer, Carbon Gas Injection Cooling System, Glass Sample for Calibration (Fused Quartz), Signal Tower Light |
| Power Source | AC 200V, Single-Phase, 30A, 50/60Hz |
| Dimensions / Weight (Approx.) |
W1,100 × D750 × H1,560mm/ 260kg |
Berikut adalah link / tautan produk catalog yang kami miliki seperti dibawah ini :
- Click Here : Yasuda Seiki : Plastic, Rubber, Tape & Polymer Catalog
- Click Here : Yasuda Seiki : Electric Wire and Cable Catalog
- Click Here : Yasuda Seiki : Leather, Vinyl Leather Cloth Catalog
- Click Here : Yasuda Seiki : Paper,Pulp Catalog
- Click Here : Drick Instrument : Industrial Testing Instrument Catalog
- Click Here : Cell Instrument : Plastic, Rubber, Tape & Polymer Catalog
- Click Here : Testex Instrument Fabric,Garment & Textile Catalog
YASUDA SEIKI - Heat Distortion Tester Series
Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
- PT. Mora Anugerah Berkat [M.A.B]
- Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan, Kota Tangerang - Provinsi Banten
- Phone : 021 7345.7064 / 7366.0160
- Mobile : 0812.8140.0749 / 0812.8770.5470
- Chat : Whats App, Line, WeChat, Telegram
- Website : www.moraanugerah.id - www.moraanugerah.com
- Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com
