HDT Test [DTUL / VICAT]
PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah Yasuda Seiki No.148 Heat Distortion Tester, berikut adalah tipe dan spesifikasi dari Harga Heat Distortion Tester seperti di bawah ini :
HDT Test [DTUL / VICAT]
- No.148 Heat Distortion Tester
- Standard Method : JIS K7191-1 ; K7206 ; ASTM D648 ; D1525 ; ISO 75-1,306
- This tester is used to evaluate the heat resistance of plastic.
- By loading specified bending stress to the test specimen while increasing the test temperature of the oil bath at a certain rate, the operator is to report the temperature at which the test specimen reaches standard deflection.
- The tester can also conduct the VICAT softening temperature test.
- CLICK HERE : Yasuda Seiki No.148 Heat Distortion Tester Brochure
| No.148HD HEAT DISTORTION TESTER | |
| SPECIFICATION | |
| Stations | 3, 4 or 6 Stations (3 kinds) |
| Temperature Range | Max. 300 °C (Oil Bath) |
| Heating Speed | 120 ± 10°C/hr, 50 ± 5°C/hr, VICAT : 120 ± 10℃/hr, 50 ± 5°C/hr |
| Bending Stress | (Method A) JIS･ISO : 1.80MPa ; (Method B) 0.45MPa ; (Method C) 8.00Mpa ; ASTM : 1.82Mpa ; 0.455Mpa |
| Weight Load | DTUL: Choose 2 weights from initial load 76.5gf to max. 3,210gf Options VICAT: 10 ± 0.2N, 50 ± 1N BP: 19.6 ± 20N |
| Displacement Measurement |
Differential Transformer : Scale 1/1,000mm, Stroke 4mm |
Pressure Foot |
DTUL: R 3.0 ± 0.2 mm |
| Option VICAT: 1.000 ± 0.015 mm2 | |
| Option Ball Pressure: φ5 mm | |
| Support Length | 64 ± 1 mm, 100 ± 2 mm |
| Refrigerating Device |
Water Circulating System ; Option Built-In Refrigerator *For low test start temperature (e.g., 20 to 23°C) |
| Oil Circulation Device |
Propeller Type For 3 and 4 Stations : 2 Propellers For 6 Stations : 3 Propellers |
| Software | Windows 10 Compatible (Included) |
| Accessories | Pressure Foot Adjustment, Specimen Holder |
Option |
Silicon Oil, Safety Cover, Simultaneous Loading Device, Built-In Printer, Oil Level Sensor, Glass Sample for Calibration (Fused Quartz), Safety Door Lock, Signal Tower Light |
Power Source |
Without refrigerator For 3 and 4 Stations : Single-Phase, AC200/220V 20A 50/60Hz For 6 Stations : Single-Phase, AC200/220V 30A 50/60Hz With refrigerator For 3 and 4 Stations : Three-Phase, AC200/220V 20A 50/60Hz For 6 Stations : Three-Phase, AC200/220V 30A 50/60Hz |
| Dimensions / Weight (Approx.) |
Floor Model W1,100 × D700 × H1,500mm / 180 to 300 kg Tabletop Model W1,100 × D700 × H1,000mm / 155 to 185 kg |
- No.148-HDA Heat Distortion Tester (Full Automatic)
- Standard Method : JIS K7191-1 ; K7206 ; ASTM D648 ; D1525 ; ISO 75-1, 306
- This tester is the fully automatic version of the HEAT DISTORTION TESTER.
- The robotic mechanism enables the operator to conduct the usual heat distortion test and VICAT softening temperature test automatically.
- By setting the test specimen to the specimen feeder, the computer software will continuously conduct heat resistance test for a maximum of 120 samples.
- CLICK HERE : Yasuda Seiki No.148 Heat Distortion Tester Brochure
HDT Test [DTUL / VICAT]
| No.148-HDA Heat Distortion Tester (Full Automatic) | |
| SPECIFICATION | |
| Stations | 3 or 6 Stations |
| Temperature Range | Max. 300°C (Oil Bath) |
| Heating Speed | 120 ± 10°C/hr and 50 ± 5 °C/hr, VICAT : 120 ± 10℃/hr, 50 ± 5°C/hr |
Bending Stress |
(Method A) JIS･ISO: 1.80MPa ; (Method B) 0.45MPa, (Method C) 8.00Mpa ASTM: 1.82Mpa, 0.455Mpa |
Weight Load |
DTUL : Choose 2 weights from initial load 76.5gf to max. 3,210gf *Simultaneous Loading Device included Options VICAT: 10 ± 0.2N, 50 ± 1N ; BP: 19.6 ± 20N |
| Displacement Measurement |
Differential Transformer : Scale 1/1,000 mm, Stroke 4 mm |
Pressure Foot |
DTUL : R3.0 ± 0.2mm Options VICAT : 1.000 ± 0.015mm² BP : Ball Diameter 5mm |
| Support Length | 64 ± 1mm, 100 ± 1mm Option 101.6 ± 0.5mm |
| Refrigerating Device |
Water Circulating System, Built-In Refrigerator *For low test start temperature (e.g., 20 to 23°C) |
| Oil Circulation Device |
Propeller Type For 3 and 4 Stations: 2 Propellers For 6 Stations: 3 Propellers |
| Test Specimens | 40 pcs × 3 sets (Total 120 pcs) *For T10mm |
| Software | Windows 10 compatible (Included) |
| Accessories | Pressure Foot Adjustment, Specimen Holder |
| Option | Silicon Oil, Glass sample for calibration (fused quartz), Built-in printer, Oil level sensor, Safety door lock,Signal tower light |
Power Source |
Without refrigerator For 3 and 4 Stations : Single-Phase, AC200/220V 20A 50/60Hz For 6 Stations : Single-Phase, AC200/220V 30A 50/60Hz With refrigerator For 3 and 4 Stations : Three-Phase, AC200/220V 20A 50/60Hz For 6 Stations :Three-Phase, AC200/220V 30A 50/60Hz |
| Air Source | 0.5MPa or more |
| Dimensions / Weight (Approx.) |
W1,460 × D900 × H1,715mm / 450 to 550kg |
- No.148-HD500 High Temperature Heat Distortion Tester
- Standard Method : JIS K7191-1 ; K7206 ; ASTM D648 ; D1525 ; ISO 75-1 , 306
- This tester adapts the air circulating heating system to test the heat resistance of plastic (usually super engineering plastic) up to 500 °C.
- The specimen racks are made by glass quartz to prevent measuring disturbances due to the deflections of the racks itself.
- CLICK HERE : Yasuda Seiki No.148 Heat Distortion Tester Brochure
| No.148-HD500 High Temperature Heat Distortion Tester | |
| SPECIFICATION | |
| Stations | 3 Stations |
| Temperature Range | Max. 500°C (Air Chamber, Nitrogen Gas Filling Device Attached) |
| Heating Speed | 120 ± 10°C/hr, 50 ± 5°C/hr, VICAT : 120 ± 10 ℃/hr, 50 ± 5°C/hr |
Bending Stress |
(Method A) JIS･ISO: 1.80MPa ; (Method B) 0.45MPa, (Method C) 8.00Mpa ASTM: 1.82Mpa, 0.455Mpa |
Weight Load |
DTUL: Choose 2 weights from initial load 76.5gf to max. 3,210gf *Simultaneous Loading Device included Options VICAT: 10 ± 0.2N, 50 ± 1N BP: 19.6 ± 20N |
| Displacement Measurement |
Differential Transformer : Scale 1/1,000mm, Stroke 4mm |
Pressure Foot |
DTUL: R3.0 ± 0.2mm Options VICAT: 1.000 ± 0.015mm² BP: Ball Diameter 5mm |
| Support Length | 64 ± 1mm, 100 ± 1mm |
| Refrigerating Device | Fan type (Air Fan Cooling), 3 Fans |
| Oil Circulation Device |
Propeller type, 2 propellers |
| Software | Windows 10 Compatible (Included) |
| Accessories | Pressure Foot Adjustment, Specimen Holder |
| Options | Simultaneous Loading Device, Built-in Printer, Carbon Gas Injection Cooling System, Glass Sample for Calibration (Fused Quartz), Signal Tower Light |
| Power Source | AC 200V, Single-Phase, 30A, 50/60Hz |
| Dimensions / Weight (Approx.) |
W1,100 × D750 × H1,560mm / 260kg |
PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti HDT Test [DTUL / VICAT] , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain.
HDT Test [DTUL / VICAT]
Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
- PT. Mora Anugerah Berkat [M.A.B]
- CLICK HERE : YASUDA SEIKI No.148 Heat Distortion Test Series Brochure
- Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
- Phone : 021 7345.7064 / 7366.0160
- Mobile : 0812.8140.0749 / 0812.8770.5470
- Chat : Whats App, Line, WeChat, Telegram
- Website : www.moraanugerah.id - www.moraanugerah.com
- Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com - marketing@moraanugerah.com
