Pundit PL-200 / PL-200PE - Ultrasonic Testing
The Pundit PL-200 and PL200PE continue the illustrious Pundit tradition that began in the 1970s. The first to use a new generation touchscreen display unit.
The Touchscreen unit can control conventional Ultrasonic Pulse Velocity Transducers as the PL-200 and the Pulse Echo Transducer as the PL200 PE.
The world known Pundit range offers users a reliable and accurate method for determining the sonic properties of materials.
The pulse velocity in a material depends on its density and its elastic properties. These in turn are related to the quality and the strength of the material.
Pundit PL-200 – The new Benchmark for
Ultrasonic testing can be used for:
An essential tool for investigating a wide range of materials. Including Concrete, Ceramics and Refractories, Timber and many others/
Ultrasonic testing is sub section of stress wave testing. The main characteristics of stress waves in a material are their frequency and the type of wave measured. The correct choice of frequency is based upon the material being tested. Coarse grained concrete responds better to a lower frequency. Fine grained mortars or rock works better with higher frequencies.
The two test methods offered by the Pundit use of either compression waves [P waves] or shear waves. The particle motion associated with compression waves can be described as vibration parallel to the direction of wave travel, much as a sound wave. The particle motion associated with shear waves can be described as vibration perpendicular to the direction of wave travel.
Ultrasonic Pulse Echo Method
The Pulse Echo technology widely extends the application range of the Pundit Touchscreen Unit and offers a variety of special features.
Pulse Echo Transducer
The Pulse Echo transducer is a shear wave transducer designed for single-handed and two-handed operation. It is particularly suited to testing where access is limited to a single side.
A cross-sectional view perpendicular to the scanning surface is provided. It facilitates the search for pipes, cracks, voids, etc.
State-of-the-art image processing for improved image quality.
Cursor placement allows a direct readout of the slab thickness and the location of hidden objects or defects.
In this example a B-Scan of a concrete object containing steel pipes.
A-Scan allows direct analysis of the raw signal.
Digital filters for better echo visibility and noise suppression.
Automatic readout of slab thickness (Echo tracker).
Contour map of results over a concrete surface, either Velocity or thickness values can be mapped.
A gate function can focus the results in the region of most concern such as reflections from the back of a tunnel grout layer.
2 x 25 cm2
Pundit-PL-200 comes standard with:
Pundit PL200PE comes standard with:
|Pundit PL-200||Pundit PL-200PE|
|Range||0.1 – 7930 μs|
|Resolution||0.1 μs (< 793 μs), 1 μs (> 793 μs)|
|Display||7” colour display 800x480 pixels|
Pulse Voltage UPV
|100 – 450 Vpp|
|-----||100 – 400 Vpp|
|Bandwidth||20 – 500 kHz|
|Receiver Gain||1x – 10’000x (0 – 80dB) [11 steps]|
|Memory||Internal 8 GB Flash memory|
|Regional Setting||Metric and imperial units and multi-language supported|
|Battery||Lithium Polymer, 3.6 V, 14.0 Ah|
|Battery Lifetime||> 8h (in standard operating mode)|
|Operating||0°C – 30°C (Charging, running instrument)|
|Temperature||0°C – 40°C (Charging, instrument is off)
-10°C – 50°C (Non-charging)
|Humidity||< 95 % RH, non condensing|
|327 10 001||Pundit PL-200|
|327 20 001||Pundit PL-200PE|
|327 10 002||Pundit Touchscreen without transducers|
|325 40 026S||2 Transducers 24 kHz|
|325 40 131S||2 Transducers 54 kHz|
|325 40 141S||2 Transducers 150 kHz|
|325 40 177S||2 Transducers 250 kHz|
|325 40 175S||2 Transducers 500 kHz|
|325 40 176||2 Exponential Transducers 54 kHz,
Include Calibration Rod
|325 40 049||2 S-Wave Transducers 250 kHz,
|327 40 130||Pundit Pulse Echo Transducer,
Include Cable and Contact Tester
|327 20 002||Pundit PL-200PE UPV Kit|
|327 01 043||Carrying strap complete|
|325 40 150||Transducer holder complete|
|327 01 049||BNC adapter cable for Pundit PL-200|
|325 40 021||Cable with BNC-plug, 1.5 m (5 ft)|
|325 40 022||Cable with BNC-plug, 10 m (33 ft)|
|710 10 031||Ultrasound couplant, 250 ml|
|325 40 048||Shear wave couplant, 100 g|
|327 01 033||Battery complete|
|327 01 053||Quick charger (external)|
|710 10 028||Calibration rod 25 μs for Pundit PL-200|
|710 10 029||Calibration rod 100 μs for Pundit PL-200|
|327 01 071S||Calibrated Tape (Set of 5)|
Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
PT. Mora Anugerah Berkat (M.A.B)