Blog

Flammability Test of Plastic [No.252-UL-94] Manual - Plastic Flammability Tester

6 Juli 2023 INDUSTRIAL TESTING BLOG

PT. Mora Anugerah Berkat (M.A.B) adalah perusahaan yang bergerak dalam bidang industrial laboratorium testing equipment khususnya plastik, rubber, film/tape and polymer material testing salah satu diantaranya adalah Flammability Test of Plastic [No.252-UL-94] Manual - Plastic Flammability Tester, berikut adalah tipe dan spesifikasi dari No.252-UL-94 (MANUAL) PLASTIC FLAMMABILITY TESTING seperti di bawah ini :


Flammability Test of Plastic [No.252-UL-94] Manual - Plastic Flammability Tester


  • No.252-UL-94 (MANUAL) PLASTIC FLAMMABILITY TESTER
  • No.252-UL-94 (ELECTRIC SYSTEM) PLASTIC FLAMMABILITY TESTER
  • Method Standard : UL-1581,ASTM-D5025,D5207
  • This tester is to evaluate the flammability resistance of electric wires by conducting a vertical flammability test. The operator is to fix the test specimen to the upper and lower Chuck and tilt the burner 20° to burn the test specimen for 15 seconds.
  • CLICK HERE : YASUDA SEIKI Plastic Flammability Testing Brochure
Model No.252-UL-94
(MANUAL)		 No.252-UL-94
(ELECTRIC SYSTEM)
Specification
Chamber 1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)		 1,000 × 555 × 900 mm
(Volume Approx. 0.5 m3)
Specimen L125 ± 5 mm,
W13.0 ± 0.5 mm, T13 mm or less		 L125 ± 5 mm,
W13.0 ± 0.5 mm, T13 mm or less
Burner L100 ± 10 mm,
Inner Diameter φ9.5 ± 0.3 mm		 L100 ± 10 mm,
Inner Diameter φ9.5 ± 0.3 mm
Burner
Base		 Slide type (With Operation Handle),
Inclination Angle 45 ± 2°,
20 ± 5° (5 V)		 Slide type
(With Jog Dial type Controller),
Inclination Angle 45 ± 2°, 20 ± 5° (5 V)
Burner
Calibration
Device		 Flow Meter : Max.150 ml/min
(Scale 2 ml/min) (Standard 105 ml/min) ;
Flow Meter: Max. 1,000 ml/min
(Scale 10 ml/min) (Standard 965 ml/min)
Manometer: Max. 200 (± 100) mmH2O
(Scale 1 mmH2O) (Standard 10 mmH2O)
Timer, Built-In Thermometer		 Flow Meter : Max.150 ml/min
(Scale 2 ml/min) (Standard 105 ml/min) ;
Flow Meter: Max. 1,000 ml/min
(Scale 10 ml/min) (Standard 965 ml/min)
Manometer: Max. 200 (± 100) mmH2O
(Scale 1 mmH2O) (Standard 10 mmH2O)
Timer, Built-In Thermometer
Accessories Flame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter		 Flame Gauge (20 mm)
(Option: 125 mm & 38 mm),
Ring Stand,Wire Mesh, Dry Cotton Pad,
Fireproof Gloves, Gas Lighter
Option Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture		 Horizontal Burning Support Fixture (HB),
Plaque Support Fixture (5 V),
Spring Clamp (VTM), Foam Support Fixture
Power Source AC 100 V, 1-Phase, 15 A, 50/60 Hz AC 100 V, 1-Phase, 15 A, 50/60 Hz
Heat Source Methane Gas (Purity: 98 % Over) Methane Gas (Purity: 98 % Over)
Dimensions /
Weight (Approx.)		 W1,510 × D610 × H1,100 mm /
200 kg		 W1,500 × D615 × H1,100 mm /
230 kg


Flammability Test of Plastic [No.252-UL-94] Manual - Plastic Flammability Tester


PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan / mensupply peralatan industrial material testing equipment seperti Flammability Test of Plastic [No.252-UL-94] Manual - Plastic Flammability Tester , kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain.


Flammability Test of Plastic [No.252-UL-94] Manual - Plastic Flammability Tester


Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

Artikel Selanjutnya »
« Artikel Sebelumnya

Blog Terbaru

Kategori