PT Mora Anugerah Berkat

ASPHALT INDENTATION PENETROMETER

INDENTATION TEST USING CUBES OR MARSHALL SPECIMENS

STANDARDS: EN 12697-20, EN 13108-6

Code : B059-10

This EN describes a test method for determining the depth of indentation of mastic asphalt and rolled asphalt, when force is applied to them via a cylindrical indentor pin with a circular flat-ended base.

The test applies to aggregates of maximum nominal size less or equal to 16 mm.

This test method is performed on mastic and road constructions asphalts, on waterproofing and floor screeds in building constructions.

The indentation test can be applied also on Marshall specimens. Condition the specimens together with their moulds for at least 60 min under water at the test temperature of 40 °C or 22 °C respectively with ± 1 °C accuracy.

ASPHALT INDENTATION PENETROMETER

Comprising:

- Rugged basic frame where the screw penetration load device is fixed.

- Two interchangeable penetration pistons having 1 and 5 cm² surface.

- Two metallic discs having total weight of 500 N ( 51 kg) that are positioned on the load device.

- Dial gauge 30 mm, sens. 0.01 mm to measure the penetration.

- Stainless steel water bath complete with water discharge cock.

Heater, cube mould, test mould, are not included and have to be ordered separately (see accessories).

Dimensions : 530 x 600 x 820 mm

Weight: 160 kg approx

ACCESSORIES :

B059-15

CUBE MOULD 70.7 mm

To prepare cube specimens.

Steel manufactured, it is easily detachable. Weight: 4350 g

B059-16

PENETRATION (ADJUSTABLE) TEST MOULD 69 mm.

Used during the penetration test of the cube specimen.

Made from aluminium alloy. Weight: 1850 g

B059-17

BASE, steel made, to fix the Marshall specimen into the Penetrometer.

Weight: 1100 g

B059-18

CALIBRATION DEVICE for the Indentation Penetrometer.

Weight: 700 g

B059-21

THERMOSTAT DIGITAL HEATING SYSTEM, complete with immersion

heating element.It heats water at the required temperature of 22 °C or of 40 °C with

an accuracy within ± 1 °C as requested by Standards.

Power supply: 230V 1ph 50Hz 1500W

Weight: 3 kg approx.

SEPARATE CONTROL PANEL,

complete with switch and electric protections, to get the heating system to CE Safety Directive

Untuk mengetahui lebih detail model atau type dan spesifikasi dari Asphalt Indentation Penetrometer silahkan click link atau tautan yang ada di bawah ini :

Asphalt Indentation Penetrometer Catalogue

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

PT.Mora Anugerah Berkat (M.A.B)

Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten

Phone : (+62) 21 7345.7064 / 7366.0160

Mobile : 0812.8140.0749 / 0812.8770.5470

Chat : Whats App,Line,WeChat,Telegram

Website : www.moraanugerah.id - www.moraanugerah.com

Email : info@moraanugerah.id - info@moraanugerah.com