GAS COOLER SERIES RC 1.1
Harga : Rp 0.00 Rp 1,000.00
Brand : Buhler Technologie,ABB
Stok : In Stock
GAS COOLER SERIES RC 1.1
GAS COOLER SERIES RC 1.1
In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and exact determination of the operating parameters. Here, gas analysis is the key for safe and efficient control of process flows, environmental protection and quality assurance. This benefits controlling flue gas emission in power stations or exhaust gas analysis in automotive engineering, as well as the efficient control of air separators or sterile production and packaging in the food industry. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably also extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measuring cells. The sample gas must therefore be conditioned before entering the analyser. The RC 1.1 is a compressor sample gas cooler for up to 2 gas paths and is an essential component for sophisticated analysis systems
Gas Cooler Technical Data
| Gas Cooler Technical Data |
|
| Ready for operation | after max. 15 minutes |
| Rated Cooling Capacity (at 25°C) | 360 kJ/h |
| Ambient Temperature | 5 °C to 50 °C |
| Gas Outlet Dew Temperature,preset | approx. 5 °C |
| Dew point fluctuations static: | ± 0.1 K |
| in the entire specification range: | ± 1.5 K |
| IP rating | IP 20 |
| Housing | Stainless steel |
| Packaging dimensions | approx. 420 x 440 x 350 mm |
| Weight incl. heat exchanger | approx. 15 kg |
| Electric supply | 115 V, 60 Hz or 230 V, 50/60 Hz ± 5% Plug per DIN EN 175301-803 |
| Electrical data | 230 V 115 V |
| Typical power input: | 296 VA 302 VA |
| max. operating current: | 2 A 3.5 A |
| Alarm output switching connection | max. 250 V, 2 A, 50 VA Connector per DIN EN 175301-803 |
| Installation | stand-alone or wall-mounted |
| Technical Data Peristaltic Pumps CPsingle / CPdouble |
|
| Flow rate | 0.3 L/h (50 Hz) / 0.36 L/h (60 Hz) with standard hose |
| Vacuum inlet | max. 0.8 bar |
| Pressure inlet | max. 1 bar |
| Outlet pressure | 1 bar |
| Hose | 4 x 1.6 mm |
| Condensate outlet | Hose nipple Ø6 mmScrew connection 4/6 (metric), 1/6"-1/4" (US) |
| Protection class | IP 40 |
| Materials Hose: | Norprene (Standard), Marprene,Fluran |
| Connections: | PVDF |
| Analogue Output Cooler Temperature Technical Data |
|
| Signal | 4-20 mA or 2-10 Vcorresponds to -20 °C to +60 °C cooler temperature |
| Connection | M12x1 plug, DIN EN 61076-2-101 |
| Technical Data Filter AGF-PV-30-F2-L |
|
| Ambient temperature | 3 °C to 100 °C |
| max. operating pressure with filter | 2 bar |
| Filter surface | 125 cm2 |
| Filter mesh | 2 μm |
| Dead volume | 108 ml |
| Materials |
|
| Filter: | PVDF, Duran Glass (parts in contact with media) |
| Seal | Viton |
| Filter element | sintered PTFE |
| Technical Data FF-3-N Moisture Detector |
|
| Ambient temperature | 3 °C to 50 °C |
| max. operating pressure with FF-3N | 2 bar |
| Material | PVDF, PTFE, epoxy resin, stainless steel 1.4571, 1.4576 |
Heat Exchanger Overview
| Heat Exchanger | TS TS-I2) | TG TG | TV-SS TVSS-I 2) | DTS(DTS-63)) DTSI(DTS6-I3))2) |
DTG DTG | DTV3)DTV-I2)3) |
| Version / Material | Stainless Steel |
Glass | PVDF | Stainless steel | Glass | PVDF |
| Flow Rate vmax 1) | 530 L/h |
280 L/h | 155 L/h | 2 x 250 L/h | 2 x 140 L/h | 2 x 115 L/h |
| Inlet dew point τe,max1) |
80 °C | 80 °C | 65 °C | 80 °C | 65 °C | 65 °C |
| Gas inlet temperature ϑG,max1) |
180 °C | 140 °C | 140 °C | 180 °C | 140 °C | 140 °C |
| Max. Cooling Capacity Qmax |
450 kJ/h | 230 kJ/h | 120 kJ/h | 450 kJ/h | 230 kJ/h | 185 kJ/h |
| Gas Pressure pmax |
160 bar | 3 bar | 3 bar | 25 bar | 3 bar | 2 bar |
| Pressure drop Δp (v=150 L/h) |
8 mbar | 8 mbar | 8 mbar | 5 mbar each | 5 mbar each | 15 mbar each |
| Dead Volume Vtot |
69 ml | 48 ml | 129 ml | 28 / 25 ml | 28 / 25 ml | 21 / 21 ml |
| Gas Connections (metric) |
G1/4 | GL14 (6mm)4) | DN 4/6 | 6 mm tube | GL14(6mm) 4) | DN 4/6 |
| Gas Connections (US) |
NPT 1/4" | GL14(1/4")4) | 1/4"-1/6" | 1/4" tube | GL14(1/4")4) | 1/4"-1/6" |
| Condensate Out Connections(metric) |
G3/8 | GL25(12mm)4) | G3/8 | Tube 10 mm (6 mm) | GL18(10mm)4) | DN 5/8 |
| Condensate Out Connections (US) |
NPT 3/8" | GL25(1/2")4) | NPT 3/8" | Tube 3/8" (1/4") | GL18(3/8")4) | 3/16"-5/16" |
Untuk mengetahui berbagai produk / bertanya informasi produk / ingin memesan produk, silahkan hubungi marketing kami siap membantu kebutuhan anda
PT.Mora Anugerah Berkat (M.A.B)
JL.Asri Blok M No 36 Kel.Cipadu Kec.Larangan Kota Tangerang, Provinsi Banten 15155
Phone : (+62)021 - 7366.0160/7345.7064
Fax : (+62)021 7366.0160
Mobile : 0812.8140.0749 / 0812.8770.5470
Chat : Whats App,Line,WeChat,Telegram
Website : www.moraanugerah.id # www.moraanugerah.com
Email : info@moraanugerah.id # info@moraanugerah.com
