PT Mora Anugerah Berkat

MATEST - Autoclave & Three Gang Prism Mould

Code : E070

AUTOCLAVE SOUNDNESS (EXPANSION) OF PORTLAND CEMENT

Standard Method : Comparable to ASTM C151 | AASHTO T107

It consists of a high pressure boiler made from special alloy steel,inside Ø 154x430 mm high, receiving a holding rack for 10 cement specimens. The heating system is achieved by electric resistances.

The separate control panel encloses a digital thermometer to visualize the boiler temperature, pressure gauge scale 0 - 600 psi with built in pressure regulator and power switches.

Supplied complete with rack for holding the specimens and safety valve with PED Cat. certificate according to the 97/23/CE Standard. Not seleable on CE market.

• Power Supply : 230V 1ph 50Hz 3500W 295psi
• Dimensions : 490 x 490 x 980 mm
• Weight : 150 kg approx.

Untuk mengetahui lebih detail model/type dan spesifikasi dari Matest : AUTOCLAVE SOUNDNESS (EXPANSION) OF PORTLAND CEMENT silahkan click link/tautan yang ada di bawah ini :

Click Here : MATEST - Autoclave Soundness (Expansion) of Portland Cement Catalog

MATEST - Autoclave & Three Gang Prism Mould

======================================================================

MOULDS FOR SOUNDNESS (EXPANSION) AND SHRINKAGE TESTS

(with length comparators, see next page)

Available models:

Code : E072

Standard Method : ASTM C490

TWO GANG PRISM MOULD to produce 25 x 25 x 250 mm specimens for expansion tests in autoclave.

Complete with 4 steel inserts. Weight: 6 kg approx.

Code : E073

Standard Method : BS 1881, 6073

TWO GANG PRISM MOULD to produce 75 x 75 x 254 mm specimens.

Complete with 4 steel inserts. Weight: 9 kg approx.

Code : E072-01

CONTACT POINTS stainless steel, spare for E072 and E073 moulds.

Pack of 10 pieces.

Untuk mengetahui lebih detail model/type dan spesifikasi dari Matest : MOULDS FOR SOUNDNESS (EXPANSION) AND SHRINKAGE TESTS silahkan click link/tautan yang ada di bawah ini :

Click Here : MATEST - MOULDS FOR SOUNDNESS (EXPANSION) AND SHRINKAGE TEST CATALOG

Code : E075

THREE GANG PRISM MOULD FOR 40.1 x 40 x160 MM MORTAR SPECIMENS

Standard Method : EN 12617-4 Comparable to: ASTM C438, NF P15-433

Used for the determination of linear shrinkage of cement mortar.

Manufactured from steel with hardness over 200 HV.

All surfaces are grinded and all parts are marked with an identification number for a correct assembling.

A part-number is engraved on each mould and a Certificate of Conformity is supplied along with.

Complete with 6 steel inserts and fixing screws.

Weight: 8.6 kg approx.

SPARE

E075-01 Contact points, stainless steel, complete with fixing screw. Pack of 12

ACCESSORIES

E075-10 STANDARD: EN 12808-4

SPACER, teflon made, dimensions 15x40x160 mm to put into the chamber of the E075 mould, to produce 10 x 40 x 160 mm specimens for shrinkage tests as per EN 12808-4 Standard. Pack of 6 spacers. E075-11 INSERTS, for the 10 x 40 x 160 mm specimen. Standard Method : EN 12808-4 Pack of 12 inserts.

E107 STANDARDS: NF P15-434 / DIN 1164

THREE GANG PRISM MOULD to produce 40 x 40 x 160 mm specimens. Made from steel 55 HRB. Complete with 6 inserts. Weight: 8 kg approx.

E113 STANDARD: NF P18-427

THREE GANG PRISM MOULD to produce 70x70x280 mm

specimens. Made from steel 55 HRB. Complete with 6 inserts. Weight: 17 kg approx.

E107-01 CONTACT POINTS, spare for E107 and E113 moulds. Pack of 12 pieces.

Untuk mengetahui lebih detail model/type dan spesifikasi dari Matest : THREE GANG PRISM MOULD FOR 40.1 x 40 x160 MM MORTAR SPECIMENS silahkan click link/tautan yang ada di bawah ini :

Click Here : MATEST - THREE GANG PRISM MOULD FOR 40.1 x 40 x160 MM MORTAR SPECIMEN CATALOG

MATEST - Autoclave & Three Gang Prism Mould

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

• PT. Mora Anugerah Berkat (M.A.B)
• Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
• Phone : 021 7345.7064 / 7366.0160
• Mobile : 0812.8140.0749 / 0812.8770.5470
• Chat : Whats App,Line,WeChat,Telegram
• Website : http://moraanugerah.id/ - http://moraanugerah.com/
• Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com