WATER BATHS FOR MARSHALL SPECIMENS

Harga : Rp 0.00 Rp 0.00

Brand : Matest,Forney,Gilson,Humboldt,Ele

Stok : In Stock

Description
Review Product

WATER BATHS FOR MARSHALL SPECIMENS

Standard Method : EN 12697-34 | ASTM D6927, D1559, D5581 | AASHTO T245

Used to maintain in water Marshall specimens at costant temperature of 60 °C ± 1 °C and asphalt specimens at 37.8 °C ± 1 °C.These baths are also ideal for general laboratory use.

Models :

Code : B051

MARSHALL WATER BATH

The internal tank and cover are stainless steel made, outside box is of painted steel sheet with wool insulation. The specimens are held by a stainless steel perforated shelf spaced from the bottom.

The bath has a capacity of 46 litres and is designed to hold up to 20 Marshall specimens.

Temperature range: from ambient to 95 °C.

Inside dimensions: 615x505x150 mm

Overall dimensions: 660x540x230 mm

The bath is supplied without thermostat and heating element to be ordered separately (see accessories).

Weight: 18 kg approx.

NEEDED ACCESSORY for the B051 Bath

B051-01

THERMOSTAT ANALOGIC Heating System, complete with immersion heating element.

Power supply: 230V 1ph 50-60Hz 1500W

In alternative:

B051-02

THERMOSTAT DIGITAL Heating System, complete with immersion heating element. The digital system ensures a better temperature control of the water at 60 ± 1 °C or 37.8 ± 1 °C as requested by Standards.

Power supply: 230V 1ph 50-60Hz 1500W

C306-03

SEPARATE CONTROL PANEL, complete with switch and electrical protections to get B051-01 and B051-02 thermostats to CE safety Directive

Code : B052

DIGITAL WATER BATH

This bath is fully double walled stainless steel made with wool insulation. The specimens are held by a shelf spaced out from the bottom. Complete with a digital thermostat and an electric stirrer for continuous water recirculation, ensuring a constant and uniform temperature of 60 ± 1 °C or 37.8 ± 1 °C as prescribed by the

Standards.

The bath can hold up to 20 Marshall specimens

Capacity: 60 litres

Temperature range: from ambient to 95 °C

The bath is equipped with a dual safety thermostat to prevent

accidental over-heatings.

Inside dimensions: 700 x 550 x 150 mm

Outside dimensions: 950 x 660 x 360 mm

Power supply: 230V 1ph 50-60Hz 1500W

Weight: 20 kg approx.

Code : B052-01

DIGITAL WATER BATH

Identical to mod. B052 but:

Inside dimensions: 430 x 420 x 160 mm

Outside dimensions: 620 x 500 x 330 mm

The bath can hold up to 9 Marshall specimens

Capacity: 30 litres

Power Supply: 230V 1ph 50-60 Hz 1200W

Weight: 15 kg approx.

Code : E136-01

DIGITAL WATER BATH

Identical to mod. B052 but:

Inside dimensions: 900 x 600 x 360 mm

Outside dimensions: 1050 x 680 x 630 mm

The bath can hold up to 80 Marshall specimens

Capacity: 200 litres

Power Supply: 230V 1ph 50-60 Hz 4000W

Weight: 55 kg approx.

Code : B052-02

DIGITAL WATER BATH WITH COOLING DEVICE

Similar to mod. B052 but equipped with cooling unit placed under the bath for controlling water temperatures where the ambient temperature is quite higher.

Temperature range from: + 3 to + 95 °C, accuracy: ± 1 °C.

The bath can hold up to 12 Marshall specimens

Capacity: 45 litres

Inside dimensions: 635 x 360 x 205 mm

Outside dimensions: 800 x 430 x 1000 mm

Power supply: 230V 1ph 50Hz 1650W

Weight: 60 kg approx

Untuk mengetahui lebih detail model/type dan spesifikasi dari WATER BATHS FOR MARSHALL SPECIMENS silahkan click link/tautan yang ada di bawah ini :

WATER BATHS FOR MARSHALL SPECIMENS CATALOGUE

Click Here : Water Baths For Marshall Catalogue

Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :

PT.Mora Anugerah Berkat (M.A.B)