YASUDA SEIKI No.258 IMPACT TESTER SERIES
Harga : Rp 0.00 Rp 0.00
Brand : Qualitest,Yasuda Seiki,Toyoseiki,Drick
Stok : In Stock
YASUDA SEIKI No.258 IMPACT TESTER SERIES
IMPACT TESTER SERIES
- No. 258 IMPACT TESTER
- Standard Method : JIS-K7110, K7111-1, ASTM-D256, D6110, ISO-179-1:2010,180
- This pendulum type impact tester for plastic enables the operator to conduct both Charpy and Izod impact test just by changing the hammer and the anvil. Also, the Tensile impact test can be conducted on this tester. The tester can be attached with an optical rotary encoder, so that the impact data can be saved in a computer.
YASUDA SEIKI No.258 IMPACT TESTER SERIES
CLICK HERE : Catalog No.258 Impact Tester Series
| No. 258 Impact Tester | ||
| Specification | ||
| Test method | Charpy Impact Tester | Izod Impact Tester |
| Reference standards | JIS-K7111, ISO-179,ASTM-D6110 | JIS-K7111, ISO-179,ASTM-D6110 |
| Capacity | 0.5, 1, 2, 4, 5, 7.5,15, 25 J | 1, 2.75, 5.5, 11, 22 J |
| Lift-up angle | 150° | 150° |
| Impact speed (m/s)* | 2.9, 3.8 (3.46) | 3.5 (3.46) |
| Striking Edge Angle* | 30 ± 1° (45 ± 2°) | 75° (-) |
| Striking Edge Radius (mm)* |
R2 ± 0.5 (R3.17 ± 0.12) | R0.8 (R0.79 ± 0.12) |
| Anvil-Edge Distance (mm)* |
- | 22 ± 0.2 (22 ± 0.05) |
| Support Length (mm)* |
62 + 0.5 (101.6 ± 0.5) | - |
| Accessories | Specimen setting gauge, Block gauge, Torque wrench (Izod only) | |
| Option | Software, Safety Cover, Hammer Release Device, Curtain for Litter Control | |
| Power Source | AC 100 V, 1-Phase, 3 A, 50/60 Hz | |
| Dimensions / Weight (Approx.) |
W550 × D350 × H850 mm, 100 kg | |
==============================================================
- No.258-L IMPACT TESTER (WITH REFRIGERATING MACHINE)
- Standard Method : JIS-K7110, K7111-1, ASTM-D256, D6110, ISO-179-1:2010, 180
- This tester enables the operator to conduct the Charpy and Izod impact tests in a low temperature condition. The low temperature chamber is double-doored and the inner door is equipped with working gloves so that the temperature inside the chamber is kept constant while the operator is attaching the test specimen.
| No. 258-L IMPACT TESTER (WITH REFRIGERATING MACHINE) | ||
| Spesifikasi | ||
| Test method | Charpy Impact Tester | Izod Impact Tester |
| Reference standards | JIS-K7111, ISO-179, ASTM-D6110 | JIS-K7110, ISO-180, ASTM-D256 |
| Capacity | 0.5, 1, 2, 4, 5, 7.5, 15, 25 J | 1, 2.75, 5.5, 11, 22 J |
| Lift-up angle | 150° | 150° |
| Impact speed (m/s)* |
2.9, 3.8 (3.46) | 3.5 (3.46) |
| Striking Edge Angle* |
30 ± 1° (45 ± 2°) | 75° (-) |
| Striking Edge Radius (mm)* |
R2 ± 0.5 (R3.17 ± 0.12) | R0.8 (R0.79 ± 0.12) |
| Anvil-Edge Distance (mm)* |
- | 22 ± 0.2 (22 ± 0.05) |
| Support Length (mm)* |
62 + 0.5 (101.6 ± 0.5) | - |
| Accessories | Specimen setting gauge, Block gauge, Torque wrench (Izod only) |
|
==============================================================
- No. 258-UTL IMPACT TESTER (WITH ULTRA LOW TEMP. REFRIGERATING MACHINE)
- Standard Method : JIS-K7110, K7111, ASTM-D256, D6110, ISO-179, 180
- With the same funtionality, test method compatibility and options of No.258-L, No.248-UTL can lower the chamber temperature to exterme temperatures, as low as -50℃.
| No. 258-UTL IMPACT TESTER (WITH ULTRA LOW TEMP. REFRIGERATING MACHINE) | |
| Spesifikasi | |
| Temperature Range |
-50 °C to 60 °C (Refrigerator) |
| Safety Device | Hammer Setting Sensor (Interlock System on the Upper Door), Acrylic Safety Cover |
| Additional Specifications |
Refer to the below table |
| Option | Software, Electric Hammer Release Device, Torque Adjustment Device (Only for Izod) |
| Power Source | AC 200 V, 3-Phase, 30 A, 50/60 Hz |
| Dimensions / Weight (Approx.) |
W1,220 × D990 × H1,660 mm, 350 kg |
==============================================================
- No.258-ZA IMPACT TESTER (FULLY AUTOMATIC)
- Standard Method : JIS-K7110, K7111, ASTM-D256, D6110, ISO-179,180
- This is the fully automatic version of the IMPACT TESTER (Charpy and Izod). A maximum of 210 impact tests can be continuously conducted just by setting the test specimen to the preparation cassette and inputting the test conditions in the computer software. The test specimen will automatically come out from the preparation cassette which is located inside the low temperature chamber. The test specimen will be impacted within 5 seconds after it comes out from the preparation cassette.
| No. 258-ZA IMPACT TESTER (FULLY AUTOMATIC) | |
| Spesifikasi | |
| Hammer | Capacity 0.5 to 25 J, Automatic Lift-Up Device, Automatic Stop Device |
| Anvil | Automatic Specimen Setting Device, Rejection Device for Tested Specimens |
| Test Specimens | 70 pcs × 3 Cassettes (Total 210 pcs)* When W10 × T4 × L80 mm, Automatic Cassette Changing Device |
| Software | Windows Compatible |
|
Option |
Hammer Height Adjustment Device (Only for Charpy), Hammer Changing Device (3 Capacities),Low Temperature Chamber, Constant Temperature & Humidity Chamber,Specimen Size Measuring Device, Collect Table for Tested Specimens |
| Power Source | AC 100 V, 1-Phase, 10 A, 50/60 Hz Low Temp. Chamber : AC 200 V, 3-Phase, 30 A, 50/60 Hz |
| Air Source | 0.5 MPa or More |
| Dimensions / Weight (Approx.) |
W1,150 × D1,000 × H1,950 mm, 350 kg |
Berikut adalah Material Testing Equipment yang kami miliki berikut adalah link / tautan produk sebagai berikut :
- CLICK HERE : YASUDA SEIKI - Plastic & Rubber Testing Catalog
- CLICK HERE : YASUDA SEIKI - Electric Wire & Cable Testing Catalog
- CLICK HERE : YASUDA SEIKI - Pulp & Paper Testing Catalog
- CLICK HERE : YASUDA SEIKI - Leather, Vinyl Leather Testing Catalog
- CLICK HERE : DRICK INST - Packaging Testing Catalog
- CLICK HERE : CELL INST - Plastic,Rubber,Tape/Film & Polymer Catalog
- CLICK HERE : TESTEX INST - Fabric, Yarn & Textile/Garment Testing Catalog
PT. Mora Anugerah Berkat (M. A. B) adalah perusahaan yang sudah berpengalaman dalam menyediakan/mensupply peralatan industrial material testing equipment seperti YASUDA SEIKI No.258 IMPACT TESTER SERIES, kami juga menyediakan peralatan yang sudah teruji dan sesuai dengan standard seperti ASTM, JIS dan lain-lain ; kami juga menyediakan berbagai brand / merk internasional dari USA, Eropa dan China,produk internasional yang kami supply / tawarkan seperti : Yasuda Seiki, Qualitest, Toyoseiki, Drick Instrument, Cometech,Testex Instrument dan lain - lain.
YASUDA SEIKI No.258 IMPACT TESTER SERIES
CLICK HERE : Catalog No.258 Impact Tester Series
Untuk informasi,pertanyaan dan pemesanan silahkan hubungi kami di :
- PT. Mora Anugerah Berkat [M.A.B]
- Alamat : Jl.Taman Asri Blok M No.36 Kel.Cipadu Kec.Larangan,Kota Tangerang - Provinsi Banten
- Phone : 021 7345.7064 / 7366.0160
- Mobile : 0812.8140.0749 / 0812.8770.5470
- Chat : Whats App, Line, WeChat, Telegram
- Website : www.moraanugerah.id - www.moraanugerah.com
- Email : info@moraanugerah.com - info@moraanugerah.id - marketing_div@moraanugerah.com - marketing@moraanugerah.com
